Asus M3A-H/HDMI Manual do Utilizador descarregar pdf (Página 33)

ASUS M3A-H/HDMI 1-21

1.8 Expansion slots

In the future, you may need to install expansion cards. The following sub-sections

describe the slots and the expansion cards that they support.

Make sure to unplug the power cord before adding or removing expansion

cards. Failure to do so may cause you physical injury and damage motherboard

components.

1.8.1 Installing an expansion card

To install an expansion card:

1. Before installing the expansion card, read the documentation that came with

it and make the necessary hardware settings for the card.

2. Remove the system unit cover (if your motherboard is already installed in a

chassis).

3. Remove the bracket opposite the slot that you intend to use. Keep the screw

for later use.

4. Align the card connector with the slot and press rmly until the card is

completely seated on the slot.

5. Secure the card to the chassis with the screw you removed earlier.

6. Replace the system cover.

1.8.2 Conguring an expansion card

After installing the expansion card, congure it by adjusting the software settings.

1. Turn on the system and change the necessary BIOS settings, if any. See

Chapter 2 for information on BIOS setup.

2. Assign an IRQ to the card. Refer to the tables on the next page.

3. Install the software drivers for the expansion card.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 105 106

Sem comentários

Asus M3A-H/HDMI Manual do Utilizador Página 33