Asus NRL-LS Manual do Utilizador descarregar pdf (Página 87)

ASUS NRL-LS motherboard user guide

4-29

Plug & Play O/S [No]

This field allows you to use a Plug-and-Play (PnP) operating system to

configure the PCI bus slots instead of using the BIOS. When [Yes] is

selected, interrupts may be reassigned by the OS. If you installed a non-

PnP OS or if you want to prevent reassigning of interrupt settings, keep

the default setting [No]. Configuration options: [No] [Yes]

Reset Configuration Data [No]

The Extended System Configuration Data (ESCD) contain information

about non-PnP devices. It also holds the complete record of how the

system was configured the last time it was booted. Select [Yes] if you want

to clear these data during the Power-On-Self-Test (POST). Configuration

options: [No] [Yes]

MPS 1.4 Support [Enabled]

This field allows you to enable or disable the MultiProcessor Specification

1.4 support. Configuration options: [Disabled] [Enabled]

Quick Power On Self Test [Enabled]

This field speeds up the Power-On-Self Test (POST) routine by skipping

retesting a second, third, and fourth time. Configuration options: [Disabled]

[Enabled]

Boot Up Floppy Seek [Enabled]

When enabled, the BIOS will seek the floppy disk drive to determine

whether the drive has 40 or 80 tracks. Configuration options: [Disabled]

[Enabled]

Post Diag [Disabled]

Configuration options: [Disabled] [Enabled]

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 119 120

Sem comentários

Asus NRL-LS Manual do Utilizador Página 87