Asus ESC2000 G2 Manual do Utilizador Página 38
- Página / 226
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Chapter 2: Hardware setup2-18
2.7.4 Removing and reinstalling the backplane
DO NOT remove the backplane unless necessary!
1. Remove all hot-swap HDD trays from the
chassis.
2. Disconnect all cables from the SATA
backplane.
3. Loosen the four screws on the
backplane.
6. Push the tray lever until it clicks, and
secures the drive tray in place. The drive
tray is correctly placed when its front
edge aligns with the bay edge.
7. Repeat steps 1 to 6 if you wish to install
a second SATA drive.
4. Firmly hold the backplane, lift it up and
remove it from the module.
5. Follow the previous instructions in
reverse to reinstall the backplane.
- Workstation 1
- ESC2000 G2 1
- User Guide 1
- First Edition 2
- April 2012 2
- Contents 3
- Safety information 9
- About this guide 10
- Conventions 11
- Typography 11
- Wheretondmoreinformation 12
- Product introduction 13
- 1.1 System package contents 14
- 1.2 Serial number label 14
- 1.3 Systemspecications 15
- 1.4 Front panel features 17
- 1.5 Rear panel features 18
- 1.7 LED information 20
- Hardware setup 21
- 2.1 Chassis cover 22
- 2.2 Motherboard overview 24
- 2-5ASUS ESC2000 G2 25
- E5-2600 series processors 25
- 2.3.1 CPU installation 26
- 2-7ASUS ESC2000 G2 27
- Chapter 2: Hardware setup2-8 28
- 2-9ASUS ESC2000 G2 29
- 2.4 System memory 30
- 2.4.3 Installing a DIMM 31
- 2.4.4 Removing a DIMM 32
- 2.5 Front panel assembly 33
- Installing a 5.25-inch drive 34
- 2.7 SATA hard disk drives 35
- 2.8 Expansion cards 39
- Expansion card lock latches 40
- Expansion card locks 40
- Front side 43
- Back side 44
- 2.10 Removable components 45
- Motherboard Info 49
- 3.1 Motherboard layout 50
- Layout contents 51
- 3.2 Jumpers 53
- Z9PE-D8 Power on button 56
- 3.4 Onboard LEDs 57
- 3.5 Connectors 62
- * LAN port LED indications 63
- 3.5.2 Audio I/O connections 63
- Audio I/O ports 63
- Connect to Headphone and Mic 63
- Connect to Stereo Speakers 64
- ASUS ESC2000 G2 3-17 65
- 3.5.4 Internal connectors 66
- 17. ASMB6 header (ASMB6) 76
- BIOS setup 77
- USB ash disk drive 78
- 4.1.3 BUPDATER utility 80
- UpdatingtheBIOSle 80
- Writing BIOS: 81
- 4.2 BIOS setup program 82
- 4.2.1 BIOS menu screen 83
- 4.2.2 Menu bar 83
- 4.3 Main menu 85
- 4.4 Ai Tweaker menu 86
- 4.4.1 DRAM Timing Control 88
- 4.5 Advanced menu 90
- Socket 1 CPU Information 91
- Socket 2 CPU Information 91
- Hyper Threading [Enabled] 92
- Active Processor Cores [All] 92
- Execute Disable Bit [Enabled] 92
- Server Class [Custom] 92
- Local APIC Mode [Auto] 93
- Power Technology [Custom] 93
- CPU C7 Report [Disabled] 95
- Package C State limit [C6] 95
- 4.5.3 ChipsetConguration 96
- QPIConguration 96
- MemoryConguration 97
- CPUIIOBridgeConguration 99
- PCHConguration 100
- Azalia HD Audio [Enabled] 101
- Intel(R) VT-d [Disabled] 101
- SATA Mode [AHCI Mode] 102
- 4.5.4 PCHSATAConguration 102
- IDE Mode 103
- PCI Express Settings 105
- USBPortsConguration 108
- 4.5.8 ACPI Settings 108
- 4.5.9 WHEAConguration 109
- WHEA Support [Enabled] 109
- Console Redirection Settings 111
- Management Services (EMS) 113
- INTEL W82574L OpROM1 [PXE] 114
- INTEL W82574L OpROM2 [PXE] 114
- SerialPort1/2Conguration 115
- VIA 1394 Controller [Enabled] 115
- 4.5.15 Runtime Error Logging 116
- 4.6 Server Management menu 117
- 4.6.1 System Event Log 118
- SEL Components [Disabled] 118
- Erase SEL [No] 118
- When SEL is Full [Do Nothing] 118
- Station IP address [0.0.0.0] 119
- Subnet mask [0.0.0.0] 119
- Gateway IP address [0.0.0.0] 119
- 4.7 Event Logs menu 120
- Log OEM Codes [Enabled] 122
- Convert OEM Codes [Disabled] 122
- 4.8 Boot menu 123
- Hard Drive BBS Priorities 124
- Network Device BBS Priorities 124
- Setup Mode [EZ Mode] 125
- Boot Option Priorities 125
- Boot Override 125
- 4.9 Monitor menu 126
- 4.10 Security menu 128
- 4.11 Tool menu 129
- 4.12 Exit menu 130
- RAIDconguration 131
- 5.1 RAIDcongurations 132
- RAID mode together 133
- 5.2.1 Creating a RAID set 135
- UsingEasyConguration 135
- D N L I N 139
- UsingNewConguration 140
- Using the Initialize command 142
- UsingtheObjectscommand 144
- R B L D 147
- Check Consistency 148
- Boot Drive 0 152
- 5.2.8 Enabling WriteCache 153
- 5.3 Intel 154
- Rapid Storage Technology 154
- 5.3.1 Creating a RAID set 155
- 5.3.3 Deleting a RAID set 158
- 5.3.5 Exiting the Intel 159
- 5.3.6 Rebuilding the RAID 160
- 5.1.5 Marvell RAID utility 163
- Create a RAID Array 163
- Delete an existing RAID Array 165
- 5.4 Intel 167
- 5.4.1 Creating a RAID set 168
- 5.4.2 Change Volume Type 170
- 5.4.3 Delete volume 171
- 5.4.4 Preferences 172
- Driver installation 175
- 6.1 RAID driver installation 176
- LSI 2008 SAS2 Driver 177
- For Windows 178
- Server 2008 OS installation 178
- For Red Hat 180
- Enterprise Linux OS 5.6 180
- Enterprise Linux OS 6.1 181
- <Enter> 182
- Preparing the Linux Driver 184
- Installing SUSE 11 Linux OS 185
- 6.2 Intel 187
- Chipset Device Software 187
- 6.3 Intel 189
- ASUS ESC2000 G2 6-17 191
- 8. When nished, press 191
- to continue 191
- ASUS ESC2000 G2 6-19 193
- 6.5 Intel 194
- 6.7 Intel 196
- ASUS ESC2000 G2 6-27 201
- to start the installation 201
- 9. Click 202
- ASUS ESC2000 G2 6-31 205
- 6.10 Intel 206
- ASUS ESC2000 G2 6-33 207
- 6.11 VGA driver installation 209
- 6.12.2 Drivers menu 212
- 6.12.3 Utilities menu 213
- 6.12.4 Make disk menu 213
- 6.12.5 Contact information 213
- Multiple GPU tech. support 215
- 7.1 AMD 216
- CrossFireX™ technology 216
- CrossFireX™ 218
- 7.2 NVIDIA 219
- SLI™ technology 219
- Goldngers 220
- SLI bridge 220
- 3-Way SLI bridge 220
- 4-Way SLI bridge 221
- 7.2.6 Enabling the NVIDIA 222
- Enabling SLI settings 224
- 7.3 NVIDIA 225
- CUDA™ technology 225
Manuais e produtos relacionados com Hardware de computador Asus ESC2000 G2
Hardware de computador Asus TR-DLSR Manual do Utilizador
(100 páginas)
(100 páginas)
Hardware de computador Asus P5BV-C Manual do Utilizador
(161 páginas)
(161 páginas)
Hardware de computador Asus NRL-LS Manual do Utilizador
(120 páginas)
(120 páginas)
Hardware de computador Asus P8C WS Manual do Utilizador
(140 páginas)
(140 páginas)
(2 páginas)
Hardware de computador Asus P9D-V Manual do Utilizador
(150 páginas)
(150 páginas)
Hardware de computador Asus NCT-D Manual do Utilizador
(112 páginas)
(112 páginas)
Hardware de computador Asus DSBV-D Manual do Utilizador
(168 páginas)
(168 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais