Asus RS100-E4/PI2 Manual do Utilizador Página 84

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 156
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 83
5-2 4 Chap ter 5: BIOS setup
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency.
Conguration options: [Auto] [533 MHz] [667 MHz]
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect). When disabled, you can
manually set the DRAM timing parameters through the DRAM sub-items.
The following sub-items appear when this item is disabled.
Conguration options: [Disabled] [Enabled]
DRAM CAS# Latency [5 Clocks]
Controls the latency between the SDRAM read command and the time
the data actually becomes available. Conguration options: [5 Clocks]
[4 Clocks] [3 Clocks] [6 Clocks]
DRAM RAS# to CAS# Delay [4 Clocks]
Controls the latency between the DDR SDRAM active command and
the read/write command. Conguration options: [2 Clocks]
[3 Clocks] [4 Clocks] [5 Clocks]
DRAM RAS# Activate to Precharge Delay [15 DRAM Clocks]
Conguration options: [1 Clocks] [2 Clocks] ~ [15 Clocks]
DRAM Write Recovery Time [4 Clocks]
Conguration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks]
5.4.6 Chipset Configuration
The Chipset Conguration menu allows you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
v02.58(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Advanced
Manual DRAM Frequency
SettingorAutobySPD
Advanced Chipset Settings
DRAMFrequency [Auto]
CongureDRAMTimingbySPD [Enabled]
SpreadSpectrum [Disabled]
OnboardLANBootROM [Enabled]
PEGPortConguration
PEGPort [Enabled]
PEGPortVC1Map [TC7]
PEGForcex1 [Disabled]
MemoryRemapFeature [Enabled]
Vista de página 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 155 156

Comentários a estes Manuais

Sem comentários