Asus Motherboard M2S-X Manual do Utilizador descarregar pdf (Página 58)

2-16

Chapter 2: BIOS Setup

IDE Conguration

Onboard PCI IDE Controller [Both]

Onboard PCI S-ATA Controller [IDE By Bios]

Hard Disk Write Protect [Disabled]

IDE Detect Time Out (Sec) [35]

ATA(PI) 80Pin Cable Detection [Host]

IDE PIO Pre-Fetch Enable [Disabled]

Onboard PCI IDE Controller [Both]

Allows you to set the onboard PCI IDE Controller. Set to [Disabled] to

disable the integrated IDE Controller. Set to [Primary] to enable only the

Primary IDE Controller. Set to [Secondary] to enable only the Secondary IDE

Controller. Set to [Both] to enable both IDE Controller.

Conguration options: [Disabled] [Primary] [Secondary] [Both]

Onboard PCI S-ATA Controller [IDE By Bios]

Allows you to set the onboard PCI S-ATA Controller.

Conguration options: [Disabled] [IDE By Bios] [RAID By Rom]

Hard Disk Write Protect [Disabled]

Allows you to enable or disable device write protection. This will be

effective only if the device is accessed through BIOS.

Conguration options: [Disabled] [Enabled]

IDE Detect Time Out [35]

Selects the time out value for detecting ATA/ATAPI devices.

Conguration options: [0] [5] [10] [15] [20] [25] [30] [35]

ATA(PI) 80Pin Cable Detection [Host]

Selects the mechanism for detecting 80Pin ATA(PI) Cable.

Conguration options: [Host & Device] [Host] [Device]

IDE PIO Pre-Fetch Enable [Disabled]

Allows you to enable or disable IDE PIO Pre-fetch Enable. Set it to

[Disabled] before testing AMIDIAG.

Conguration options: [Disabled] [Enabled]

2.3.6 IDE Configuration

The items in this menu allow you to set or change the congurations for

the IDE devices installed in the system. Select an item then press <Enter>

if you wish to congure the item.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 85 86

Sem comentários

Asus Motherboard M2S-X Manual do Utilizador Página 58