Asus T3-P5945GCX2 Manual do Utilizador descarregar pdf (Página 51)

5-3ASUS T3-P5945GCX2

5.1.1 ASUS EZ Flash utility

The ASUS EZ Flash feature allows you to update the BIOS without having to go

through the long process of booting from a oppy disk and using a DOS-based

utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).

To update the BIOS using EZ Flash:

1. Visit the ASUS website (www.asus.com) to download the latest BIOS le for

the motherboard and rename the same to P5L13LSE.ROM.

2. Save the BIOS le to a oppy disk, then restart the system.

3. Press <Alt> + <F2> during POST to display the following.

EZFlash starting BIOS update

Checking for oppy...

4. Insert the oppy disk that contains the BIOS le to the oppy disk drive.

When the correct BIOS le is found, EZ Flash performs the BIOS update

process and automatically reboots the system when done.

EZFlash starting BIOS update

Checking for oppy...

Floppy found!

Reading le “P5L13LSE.rom”. Completed.

Start erasing.......|

Start programming...|

Flashed successfully. Rebooting.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

• A “Floppy not found!” error message appears if there is no oppy disk in the

drive. A “P5L13LSE.ROM not found!” error message appears if the correct

BIOS le is not found in the oppy disk. Make sure that you rename the

BIOS le to P5L13LSE.ROM.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 79 80

Sem comentários

Asus T3-P5945GCX2 Manual do Utilizador Página 51