Asus M2V Manual do Utilizador descarregar pdf (Página 110)

ASUS M2V

5-15

8. If you select <Y> the utility will duplicate your data. Press <Y> anytime

if you want to exit the duplication process.

3. From this point, you can auto-congure the RAID array by selecting

Auto Setup for Data Security or manually congure the RAID array

for mirrored sets. If you want to auto-congure, proceed to the next

step, otherwise, skip to step 6.

4. Select Auto Setup for Data Security and press <Enter>. The

following conrmation message appears.

The data on the selected disks will

be destroyed. Continue? (Y/N)

10. Press <Y> to conrm or <N> to return to the conguration options.

11. Press <Esc> to go back to main menu.

Auto create array will destroy all

data on disks, Continue? (Y/N)

5. Press <Y> to conrm or <N> to return to the conguration options. If

you selected <Y>, proceed to step 11.

6. Select Select Disk Drives, then press <Enter>. Use arrow keys to

select disk drive/s, then press <Enter>. An asterisk appears before a

selected drive.

7. Select Start Create Process and press <Enter> to setup hard disk for

RAID system. The following inquiry appears:

Save the data on source disk to

mirror after creation? (Y/N)

Duplicating...

RAID 1 for data protection

Press Yes(Y) to Escape

9. If you select <N>, the following conrmation message appears.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 116 117

Sem comentários

Asus M2V Manual do Utilizador Página 110