Asus A3000N Manual do Utilizador

DISASSEMBLY PROCEDURE 3 - 1 Chapter 3 Disassembly Procedure Please follow the information provided in this section to perform the complete disassembly

DISASSEMBLY PROCEDURE 3 - 10 8. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the CPU. 9. Squeeze the vacu

DISASSEMBLY PROCEDURE 3 - 11 ODD Module The illustration below shows how to remove the ODD module. 1. Remove 2 screws from the cover (No.1, No.2)

DISASSEMBLY PROCEDURE 3 - 12 3. Remove 4 screws (no.4-7) [M2 * 2L (P) W-NI] from ODD bracket. 4 5 7 6

DISASSEMBLY PROCEDURE 3 - 13 Keyboard The illustration below shows how to remove the keyboard Removing Keyboard 1. Remove 2 screws here (No.1,

DISASSEMBLY PROCEDURE 3 - 14 4. Lay the keyboard down over the Touch Pad module. *Do not remove the keyboard yet. The keyboard cable is still at

DISASSEMBLY PROCEDURE 3 - 15 5. Disconnect the connector of touch pad beneath keyboard.

DISASSEMBLY PROCEDURE 3 - 16 LCD Module The illustrations below show how to remove and disassemble the LCD module. The module contains LCD panel, i

DISASSEMBLY PROCEDURE 3 - 17 5. Disconnect the 2 connectors. 6. Open LCD, and remove 2 screws on both ends (No.1, No.2). [M2. * 4L] 7. Remov

DISASSEMBLY PROCEDURE 3 - 18 Disassembling LCD Module 1. Remove 5 rubes and 5 screws (No.1 ~ No.5) [M2.5*6L(K) (4.6) B-NI, NY] on the LCD bezel.

DISASSEMBLY PROCEDURE 3 - 19 3. Disconnect the 2 cables on inverter board. (No.7, No.8). 4. Remove 4 screws here (no.9-12) [M2.5*6L(K) (4.6) B

DISASSEMBLY PROCEDURE 3 - 2 Battery module The illustration below shows how to remove the battery module. Removing Battery Module 1. Turn over t

DISASSEMBLY PROCEDURE 3 - 20 5. Remove 4 screws (no.13-16) [M2*3L(K) B-NI, NYLOK] to separate the LCD panel from the LCD back cover. 6. Remo

DISASSEMBLY PROCEDURE 3 - 21 7. Remove 6 screws (no.17-22) [M2*3L(K) B-NI, NYLOK] on both sides to separate the LCD brackets from the panel.

DISASSEMBLY PROCEDURE 3 - 22 9. Tear of the tape and disconnect the cable from CCD module. 10. Remove CCD module.

DISASSEMBLY PROCEDURE 3 - 23 11. Tear the tape on aluminum foil and Remove the cable and microphone.

DISASSEMBLY PROCEDURE 3 - 24 Top Case Module The illustrations below show how to disassemble and remove the top case module of the notebook. The m

DISASSEMBLY PROCEDURE 3 - 25 3. Remove 5 screws here (no.6-10) [M2*4L]. 4. Remove 5 screws here (no.11-15) [M2*6L] 9 8 6 7 10 14 12 11 13

DISASSEMBLY PROCEDURE 3 - 26 5. Lift it up to release the top case. Removing Touch Pad Module 1. Remove 6 screws here (No.16-21) [M2 * 3L]

DISASSEMBLY PROCEDURE 3 - 27 Motherboard Module The illustrations below show how to disassemble and remove the motherboard module of the notebook.

DISASSEMBLY PROCEDURE 3 - 28 Removing Motherboard 1. Disconnect the connector of speaker (no.4) on motherboard. 2. Remove 5 screws (no.5-9

DISASSEMBLY PROCEDURE 3 - 29 3. Lift the motherboard up a little bit and push aside the bottom case, and then separate motherboard module from the

DISASSEMBLY PROCEDURE 3 - 3 HDD Module The illustrations below show how to remove the HDD module from the notebook. Removing HDD Module 1. Relea

DISASSEMBLY PROCEDURE 3 - 30 Bottom Case Module The illustrations below show how to disassemble and remove the bottom case module of the notebook.

DISASSEMBLY PROCEDURE 3 - 4 Disassembling HDD Module Remove 2 screws here (No.2, No.3) [M3 * 3L (K) B-NI] and 2 screws (No.4, No.5) [M3 * 3 L (K) B

DISASSEMBLY PROCEDURE 3 - 5 Memory Module The A3000N Series Notebook comes standard with one SO-DIMM in SO-DIMM socket. There is another expansion

DISASSEMBLY PROCEDURE 3 - 6 Wireless LAN Module The illustration below shows how to remove the Wireless LAN module. Removing Wireless LAN module

DISASSEMBLY PROCEDURE 3 - 7 CPU Module The illustrations below show how to remove the CPU module from the notebook. Removing CPU 1. Remove 2 screw

DISASSEMBLY PROCEDURE 3 - 8 3. Disconnect the cable on CPU module. 4. Remove the 2 screws aside the CPU fan (No.3, No.4) [M2 * 6L (K, D4.6) (K

DISASSEMBLY PROCEDURE 3 - 9 6. Remove the 4 screws upon the CPU module (No.5 ~No.8) [M2 * 6L (K, D4.6) (K) B-NI, NY]. 7. Take away the CPU hea