Asus E500-PIB Guia do Utilizador descarregar pdf (Página 23)

19 • Schlage • Schlage Utility Soware User's Guide

Couple HHD to PIM400 or PIB300AD-Series Locks and Controllers

Couple HHD to PIM400 or PIB300

AD-Series devices can be coupled, or authenticated, with the HHD. This provides enhanced security by

ensuring that the device will only communicate with HHD(s) to which it has been coupled. Once the

device has been coupled, the coupling password is passed to the device from the HHD during

programming.

Î HHDs with the same coupling password can program the

same devices. Once the HHD and the device are coupled,

the coupling password is disabled in the PIM400 or

PIB300 and any HHD with the correct coupling password

will automatically couple with the PIM400 (or PIB300).

1 Remove the PIM400 or PIB300 cover.

2 The HHD must be in USB mode. See Connection Type

on page 13 for more information.

3 Connect the HHD to the PIM400 or PIB300 using

the HH-USB cable. The PIM400 or PIB300 will be

displayed on the HHD screen.

4 On the HHD, select Device Options.

5 On the PIM400 or PIB300, press and hold the LINK 1

button. Then press the LINK 2 button three times.

6 On the HHD, select Couple HHD to Device.

7 When Coupling is successful, a message will be displayed on the HHD screen.

Couple HHD to WRI400/CT5000

The WRI400/CT5000 can be coupled, or authenticated, with the HHD. This provides enhanced

security by ensuring that the device will only communicate with HHD(s) to which it has been coupled.

Once the device has been coupled, the programming password is passed to the device from the HHD

during programming.

Î HHDs with the same programming password can program the same devices. Once the HHD and

the device are coupled, the coupling password is disabled in the WRI400/CT5000 and any HHD

with the correct coupling password will automatically couple with the WRI400/CT5000.

1 Remove the device cover.

2 The HHD must be in USB mode. See Connection Type

on page 13 for more information.

3 Connect the HHD to the device using the HH-USB

cable. The name of the device will be displayed on the

HHD screen.

4 On the HHD, select Device Options.

5 On the WRI400/CT5000, press and hold the Schlage

button. Then press the LINK button three times within

ﬁve (5) seconds. Then release both buttons.

6 On the HHD, select Couple HHD to Device.

7 When Coupling is successful, a message will be displayed on the HHD screen.

This function works

with AD-Series

devices only.

Link 1 Button Link 2 Button

The HHD will use

a default Coupling

Password (123456)

when coupling with a

device. The Coupling

Password should be

changed to provide

increased security

for your locks. See

Coupling Password

on page 14 for

more information.