Asus LSI SAS3442X-R Manual do Utilizador descarregar pdf (Página 65)

CFGGEN Commands A-17

If there are any existing IM, IME, or IS volumes when this command is

run, the user is notiﬁed via an output message, no action is taken, and

CFGGEN returns FAILURE. If Integrated RAID is already disabled when

this command is run, CFGGEN returns SUCCESS.

Command Line –

cfggen <controller #> disableir

Parameters –

• <controller #> – Number of the SAS controller targeted by this

command.

Program Return Value –

0x00 SUCCESS: command completed successfully.

0x01 FAILURE: bad command line arguments or operational failure.

A.3.12 ENABLEIR Command (EFI Version Only)

The ENABLEIR command, which is currently supported only in the EFI

version of CFGGEN, enables Integrated RAID functionality on the

supported SAS controller chips. This is done by clearing the

MPI_IOUNITPAGE1_DISABLE_IR bit in the IO Unit 1 MPT Conﬁguration

Page.

If there are any existing IM, IME, or IS volumes when this command is

run, the user is notiﬁed via an output message, no action is taken, and

CFGGEN returns SUCCESS. If Integrated RAID is already enabled when

this command is run, CFGGEN returns SUCCESS.

Command Line –

cfggen <controller #> enableir

Parameters –

• <controller #> – Number of the SAS controller targeted by this

command.

1 2 ... 60 61 62 63 64 65 66 67 68

Sem comentários

Asus LSI SAS3442X-R Manual do Utilizador Página 65