Asus RT-N10 B1 (RT-N10+ B1) Manual do Utilizador descarregar pdf (Página 7)

ASUS RT-G32 rev. C1 and RT-N10 rev.B1

Written by Administrator

Wednesday, 12 December 2012 12:12 -

The next is the LAN group intended for configuring the IP-address of the LAN-port and thesubnet mask, it also allows turning the DHCP-server on and setting routing rules.

In the WAN group one can configure the Internet connection, manage the bandwidth and statusdisplay of the following: the virtual server, the port triggering, the demilitarized zone and theDDNS. ASUS RT-N10 rev. B1 and RT-G32 rev.C1 support the following internet connectiontypes: static and dynamic IP, PPPoE, L2TP and PPTP. The 802.1X MD5 support was a nicesurprise; it allows connecting even to those providers who demand this authentication method.If the provider offers IPTV with the use of the corresponding set top box, then the IPTV STB portchoice allows specifying the port to which this network equipment is connected. In WAN QoStab one can manually set the speed of the existing connection if the router fails to detect itautomatically.

The Port Trigger tab allows redirecting TCP and UDP ports to communicate with computersconnected to the router.

Turning Firewall on (SPI Firewall) provides RT-N10 rev.B1 and RT-G32 rev.C1 and devicesbehind them with basic protection. If necessary, certain packets can be filtered based on URL,MAC and IP-addresses, numbers of TCP/UDP ports. These settings are configured in theFirewall group. The general tab contains parameters which allow turning protection againstDoS-attacks on, permit or deny external echo-requests.

7 / 18