
ASUS P5BV Series 5-49
4. The
Select New Array Type
screen apprears.
Use the arrow keys to select
Create IS Volume
, then press <Enter>.
5. The
Create New Array
screen shows the disks you can add to make up
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
By default, the RAID Disk eld shows No before array creation. This eld is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
Esc=ExitMenuF1/Shift+1=Help
Enter = Choose array type to create
LSILogicCongUtilityv6.16.00.00(2007.05.07)
SelectNewArrayType--SAS1068
Create IM Volume Create Integrated Mirror Array of 2
disksplusanoptionalhotspare.Data
ontheprimarydiskmaybemigrated.
Create IME Volume Create Integrated Mirrored Enhanced
Arrayof3to8disksincludingan
optional hot spare.
ALL DATA
onarraydiskswillbeDELETED!
Create IS Volume Create Integrated Striping array of
2to8disks.
ALL DATA
onarraydiskswillbeDELETED!
Esc=ExitMenuF1/Shift+1=Help
SPACE/+/-=SelectdiskforarrayorhotspareC=Createarray
LSILogicCongUtilityv6.16.00.00(2007.05.07)
CreateNewArray--SAS1068
Array Type: IS
ArraySize(MB):102996
SlotDeviceIdentierRAIDHotDrivePredSize
Num DiskSprStatusFail(MB)
0 SEAGATE ST373454SS 0003 [Yes][NO]-----------70007
1 SEAGATE ST373454SS 0003
[NO][NO]-----------70007
2 SEAGATE ST373454SS 0003
[Yes][NO]-----------35003
3 SEAGATE ST373454SS 0003
[Yes][NO]-----------35003
Comentários a estes Manuais