
ASUS P5BV Series 5-53
Managing hot spares
You may congure one disk as a global hot spare to protect critical data on the IM/
IME volume(s). You may create the hot spare disk at the same time you create the
IM/IME volume. Refer to this section when adding a hot spare disk on an existing
volume.
If a disk on an IM/IME volume fails, the utility automatically rebuilds the failed
disk data on the hot spare. When the failed disk is replaced, the utility assigns
the replacement as the new hot spare.
To create a hot spare:
1. Follow steps 1 ~ 3 of the section
Viewing volume properties
.
2. From the
View Array
screen, select
Manage Array
, then press <Enter>.
3. From the
Manage Array
screen select
Manage Hot Spare
, then press
<Enter>.
Esc=ExitMenuF1/Shift+1=Help
Enter=SelectItemAlt+N=NextArrayC=Createanarray
LSILogicCongUtilityv6.16.00.00(2007.05.07)
ViewArray--SAS1068
Array 1 of 1
IdentierLSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)51498
Status Optimal
Manage Array
SlotDeviceIdentierRAIDHotDrivePredSize
Num DiskSprStatusFail(MB)
0 SEAGATEST373454SS0003YesNOOkNo34331
2 SEAGATEST373454SS0003YesNOOkNo34331
3 SEAGATEST373454SS0003YesNOOkNo34331
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item
LSILogicCongUtilityv6.16.00.00(2007.05.07)
ManageArray--SAS1068
IdentierLSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)51498
Status Optimal
Manage Hot Spare
SynnchronizeArray
Activate Array
Delete Array
Comentários a estes Manuais