
ASUS P5BV Series 2-25
3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID
1, RAID 0+1, and RAID 5 conguration using the Intel
®
Matrix Storage
Technology or RAID 0, RAID 1 and RAID 0+1 conguration using the LSI
MegaRAID
®
utility embedded in the Intel
®
ICH7R Southbridge.
These connectors are set IDE mode by default. In IDE mode, you can connect
Serial ATA boot/data hard disk drives to these connectors. If you intend to create
a Serial ATA RAID set using these connectors, set the Congure SATA as item
in the BIOS to [RAID]. See section “4.3.5 IDE Conguration” for details.
®
P5BV
P5BV
SATA Connectors
SATA4
SATA2
SATA3
SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXP3
RSATA_RXN3
GND
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXP4
RSATA_RXN4
GND
Use only two Serial ATA RAID connectors for each RAID 0 or RAID 1 set.
Comentários a estes Manuais